Campbell HydroSense II Podręcznik Użytkownika Pobierz pdf (Strona 22)

Section 3. Downloading Data

Close the "Add a device" window by pressing the Close button. Windows will

install the necessary drivers to communicate with the HydroSense II; the

progress will be shown above the Windows task bar.

Once the installation is complete, the HydroSense software will connect to the

HydroSense II.

3.2.3 Disconnecting

The software does not need to be connected to a device to view downloaded

data.

The software does need to be connected to the HydroSense II display to

perform the following.

• Download new measurements

• Download new zones

• Upload new or modified zones

• Change settings

• Set the HydroSense II display clock

Maintaining a Bluetooth connection consumes battery power. Disconnect and

power down the HydroSense II after a data download to conserve battery life.

All other software functions are available while disconnected.

3.2.4 Connect Errors

The following errors may occur when connecting to a device. Detailed

information on each error can be found in SECTION 7. Error Codes (p. 7-1).

• BTUnkownError - an error has occurred during the connection and the

local Bluetooth stack did not specify the reason.

• BTSocketError - there was an error creating a Bluetooth connection to the

device.

• HydrocolNoResponse - a Bluetooth connection to the HydroSense II

display was created, but the device is not responding to commands from

the software.

3-4

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 81 82

Brak uwag

Campbell HydroSense II Podręcznik Użytkownika Strona 22