Campbell AVW200 series Instrukcja Obsługi Pobierz pdf (Strona 28)

Temperature Zero Readings & Thermal Factors

NOTE: TEMPERATURE ZERO AND THERMAL FACTORS ARE USED FOR TEMPERATURE

CORRECTION. TEMPERATURE CORRECTION MAY BE USED TO COMPENSATE FOR CHANGES IN

A GAGE’S READINGS DUE TO TEMPERATURE CHANGE. TEMPERATURE EFFECT ON READINGS

VARIES ON DIFFERENT MODELS OF GAGES AND TEMPERATURE CORRECTION IS OFTEN NOT

REQUIRED. DEPENDING ON THE GAGE MODEL TEMPERATURE CORRECTION MAY NOT BE

AVAILABLE AND SOME GAGE MODELS REQUIRE A DIFFERENT FORMULA TO COMPENSATE.

TEMPERATURE CORRECTION IS COMMENTED OUT IN THE MAIN PROGRAM FILE BY DEFAULT.

Default values for Temperature Zero Readings and Thermal Factors are 0. Temperature

Zero Readings and Thermal Factors can be added if the user requires the Datalogger to

use temperature compensation.

Navigate to the Main(.CR8/.CR1) file C:\Campbellsci\CRBasicEditor. Open the

Main(.CR8/.CR1) file with notepad and uncomment the line specified in the code for all

model gages that temperature correction is required.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 46 47

Brak uwag

Campbell AVW200 series Instrukcja Obsługi Strona 28