Campbell RavenXTG GPRS/EDGE Podręcznik Użytkownika Pobierz pdf (Strona 80)

Raven EDGE/GPRS for Cingular - User Guide, version 2.31 75

AT Commands: UDP

*UDPLAST=n

*USD=n

If enabled, sets S53 to the last accepted

IP address through UDP auto answer. This can be used

in conjunction with MD3 so that when there is no UDP session, new ethernet host data will

cause a connection to be restored to the last IP accepted through UDP auto answer. .

n=0 : Does not change S53 setting. (Default).

n=1 : Set S53 to the last ac

cepted IP.

Note: This does not change the S53 setting in NVRAM. If the modem is reset, the

original S53 setting will be restored from NVRAM.

Waits the specified delay before sending the first UDP packet

and the

subsequent UDP packets

out to the serial port.

n=1 - 255 Delay in 100ms units, from 100 ms to 25.5 sec.

n=0 : No UDP pa

cket delay (Default).

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 130 131

Brak uwag

Campbell RavenXTG GPRS/EDGE Podręcznik Użytkownika Strona 80